The awkward to tape area is the boot top directly above the rudder shaft,a tight turn in the hull. I did ask about keel fill but they built the plug and two moulds from it,I assume one for Ohio and one for Hamlet,he has no further info except that Tartan built the deck mould. I have my centerboard out,opened up the bolt holes and injected them with thickened epoxy.I have just,this morning,drilled and retapped the fastner holes.Previously three of the bolts were only tight because I stuck tie wraps in the holes before replacing wasted bolts! They also built the Tartan 41 moulds.
_________________ Hull #6
|