Rick,
Here's what I did on Tortuga's Lie. I went for a vertical windlass with a capstan because the pointy end on our Tartans is a bit too narrow for a horizontal windlass, or at least the vertical takes up much less deck space. The vertical windlass has it's motor protected from the elements more so than the horizontal.
I am using the house bank as my electrical source instead of a dedicated battery in the bow thinking that the extra 50lbs of weight up front in addition to all of the chain I put in may adversely affect the sailing performance. Yes I know I spent more money for cables etc, but I feel good about my decision also, GenuineDealz(dot)com has good pricing on pre-tinned marine cable and connections. (no affiliations)......
I have divided my anchor locker in two for two rodes. I wish I had a picture, but never thought about it.....
Try to get the most powerful windlass you can afford within reason. I have an 1100 watt unit from Quick and it's been flawless thus far (5 years?) I have a remote switch at the engine panel in the cockpit and foot switches at the windlass. I opted not to get the handheld remote thinking that my hands may be busy with the deck wash etc..... by the way, install a deck wash!!! without a doubt, one of the best things I've installed!!! Especially on the Chesapeake with all of that sticky mud!
Don't forget to use a heavy duty chain stop to take the pressure off of the windlass and use a snubber of sorts when anchoring. You will need to reinforce the underside of the foredeck at the windlass location and don't forget to hollow out the balsa coring and fill with an epoxy putty/slurry.
Here's a pic of my foredeck: (click on picture to expand)
Attachment:
IMG_0683.jpg [ 1.2 MB | Viewed 0 times ]