Custom Gimbal Sizing

Cacycle · **Joined:** 28 Nov 2018 16:38 **Posts:** 9

I'm on the other side of the country as my boat ('78), and have access to a table saw. I want to make a custom cabinet to replace the gas stove currently in place. It'll use an electric cooktop and gimbal with a set of Dickinson 26-003 Gimbal Mounting Kit. I measured the height and depth that I need before leaving the boat, but wrote down a confusing number for the width. I need to know the width (side to side) of the opening in the gimbal slot. Can someone with the same vintage boat please measure and report back? Many thanks!

Cacycle · **Joined:** 28 Nov 2018 16:38 **Posts:** 9

Anyone here own or have access to a Tartan 37, built late 70's or early 80's and have access to a tape measure? Would greatly appreciate your help.

eschaton · **Joined:** 04 Jun 2017 16:14 **Posts:** 7

On my 1981 Tartan 37 #310 the width of the stove area is 23"

Cacycle · **Joined:** 28 Nov 2018 16:38 **Posts:** 9

eschaton wrote:

On my 1981 Tartan 37 #310 the width of the stove area is 23"

Thank you, eschaton! That is very helpful. For some reason I wrote down 16 inches, and I knew that can't be right.

Tartan37.com

Custom Gimbal Sizing

Who is online