Holding tank

cseltzjr · **Joined:** 16 May 2009 08:06 **Posts:** 236

I am reconfiguring my head / holding tank. One thing I would like to do is remove the cleat in front of the tank and push it as far forward as it will reasonably go. I want to make some room on the back of the shelf for a pump. Has anyone messed with this set up or does anyone know why Tartan has the tank protruding into the hanging locker? Thanks

berwick · **Joined:** 21 Oct 2006 18:12 **Posts:** 325

My tank doesn't go into my hanging locker, but the hoses do. What cleat are you talking about?

Richard

cseltzjr · **Joined:** 16 May 2009 08:06 **Posts:** 236

There is a block of wood screwed to the shelf that stops the tank from moving forward. There is about 10" of space in front of the tent and the aft corner of the tank protrudes into the hanging locker. I'll try and post a picture tomorrow. It sounds like there is no good reason for this and I should be okay moving it. Thanks

cseltzjr · **Joined:** 16 May 2009 08:06 **Posts:** 236

I call the block of wood a cleat (I think it is a woodworking term).

berwick · **Joined:** 21 Oct 2006 18:12 **Posts:** 325

That's what through me off calling it a cleat. What do you mean by "tent"?

Richard

cseltzjr · **Joined:** 16 May 2009 08:06 **Posts:** 236

It should say tank, not tent. Sorry

berwick · **Joined:** 21 Oct 2006 18:12 **Posts:** 325

Oh ok, that makes sense

Richard

Tartan37.com

Holding tank

Who is online