50 Westerbeke Sea Water Pump Pulley

Mike · **Joined:** 09 Jul 2008 12:51 **Posts:** 251

All, I have a Jabsco 5320-0011 sea water pump (new). I need a pulley for it. Anyone know where I can get one ?

UPDATE
The set screw on the old pump was seized and would not come off. I took it to a machine shop who was able to remove it. I did learn from this that the Westerbeke 50 part number was 11373; Torresen no longer carries the part. There is no replacement part option either. Torresen suggested if I needed one to go to a industrial supply place to match it up with something they may have in inventory.

redvette · **Joined:** 14 Dec 2006 22:13 **Posts:** 59

Not sure but I looked all over for the stainless screws (flat-head vs phillips) that hold the chrome plate on the rub rail. I finally found that Ace Hardware of all places.

Mark

cseltzjr · **Joined:** 16 May 2009 08:06 **Posts:** 236

I got mine from Graingers. You can pick it up on line. I think it is 5.5 or 6" diameter fr a 1/2 inch belt and I forget the shaft size. Pretty inexpensive.

Tartan37.com

50 Westerbeke Sea Water Pump Pulley

Who is online